Crystallization and Microstructure Evolution of Amorphous Al85Y4Nd4Fe7 Alloy

来源 :稀土学报(英文版) | 被引量 : 0次 | 上传用户:sidiss
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
A rapidly solidified Al85Y4Nd4Fe7 (%, in nominal atomic fraction) alloy was prepared by melt spinning. As-quenched and as-annealed microstructures were studied by differential scanning calorimetry (DSC), X-ray diffraction (XRD), transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HRTEM). Fully amorphous structure could be obtained in the rapidly solidified Al85Y4Nd4Fe7 alloy ribbons. The temperature of first crystallization exceeds 300 ℃. Crystallization of as-annealed Al85Y4Nd4Fe7 alloy is shown to occur in two stages: (1) primary crystallization of α-Al; (2) formation of Al3Y, Al13Fe4 and unknown crystalline phases.
其他文献
A new kind of nano-biomaterials of nano apatite ( NA ) and polyamide8063 ( PA ) composite was prepared by direct using NA slurry. The experimental results showe
The poly ( lactic acid- co-lysine ) was synthesized using IR and 1 H NMR to characterize the copolymer. And then the RGD modification copolymer RGD-PLAL was pre
Ti/Al2O3 composite with improved mechanical properties was synthesized by the spark plasma sintering. The effect of Nb on the microstructure of the composite wa
The grinding characteristics of two or multi-component material of clinker with limestone, blast furnace slag and fly ash were studied. Investigation was carrie
We present a Monte Carlo (MC) method to simulate the scattering for medium within randomly distributed particles,discuss the convergence of this method by varyi
目的 评价和分析2009-2013年全国抗结核药物敏感性试验(简称“药敏试验”)熟练度测试结果,改善我国结核病实验室药敏试验能力.方法 2009-2013年对全国有能力开展药敏试验的省
Curvatures are important geometric attributes of surfaces. There are many applications that require as a first step the accurate estimation of curvatures at arb
Hyaluronan may be used in tissue engineering as a scaffold, and since the scaffold should degrade after the cells have proliiferated, and heat treatment is a me
An optimal concentration of the etching solution for deep etching of silicon, including 3% tetramethyl ammonium hydroxide and 0.3% (NH4)2S2O8, was achieved in t
Alumina dispersion strengthened copper(ADSC) alloy was produced by internal oxidation.The hardness,ultimate tensile strength and electrical conductivity measure