High-precision group-delay dispersion measurements of optical fibers via fingerprint-spectral wavele

来源 :PhotonicsResearch | 被引量 : 0次 | 上传用户:elvisivle
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The group-delay dispersion of an optical fiber was measured with the time-of-flight method, using fingerprint-like characteristic spectra from a mode-locked fiber laser source. To determine the group-delay dispersion up to the fourth order, least-squares fitting was applied to the overall time waveform mapped on the time axis for the fingerprint- spectral broadband pulses through a long optical fiber. The analysis of all 4003 data points reduced statistical uncertainty, and provided second-, third-, and fourth-order dispersion with uncertainties of 0.02%, 0.4%, and 4%, respectively.
其他文献
In order to classify the gears and achieve high precision measurement results, a non-contact gear measurement system based on the laser vision is developed in this paper. The laser vision precision measurement method (LVPMM) is proposed to ensure the accu
期刊
报道了一种输出波长为1.7 μm波段的可调谐多波长拉曼光纤激光器。该激光器采用过滤的1550 nm波段自发辐射源来作为泵浦源,从而避免受激布里渊散射。高非线性光纤和色散位移光纤作为非线性增益介质,从而获得峰值波长为1.7 μm波段的增益谱。并采用一段未泵浦的掺铒光纤用于吸收增益谱中残余的泵浦光,所产生的增益谱由Sagnac环滤波器进行滤波。通过调节偏振控制器和放大自发辐射后端的可调谐滤波器,可以产生在1652.77 nm和1686.20 nm之间具有调谐范围大于33.4 nm的单波长激光输出。单波长激光器
本文分析了利用透镜成像的像面强度全息图的衍射特性,提出了利用双缝孔径记录像面强度彩虹全息图的方法,同时给出了实验结果。
期刊
提出了一种基于二维(2D)转三维(3D)骨架的实时检测双分支子网络,可实现2D骨架关键点的3D估计和2D、3D骨架特征融合的人体3D动作识别。在检测过程采用OpenPose框架实时获取视频中人体骨架的2D关键点坐标。在2D转3D骨架估计过程中,设计了一种输入为难样本且具有反馈功能的孪生网络。在3D动作识别过程中设计了一种2D、3D骨架特征双分支孪生网络,以完成3D姿态识别任务。在Human3.6M数据集上训练3D骨架估计网络,在基于欧拉变换的NTU RGB D 60多视角增强数据集上训练骨架动作识别网络,
期刊
The optical properties of disperse red 1 (DR1) dye molecules can be changed by controlling the molecular configurations using AlPO4-5 (AFI) and SAPO-47 (CHA) single crystals. Polarized and temperature dependent absorption spectra show that DR1 molecules e
利用飞秒激光搭建的双光子聚合系统,成功制作出微纳长周期光纤光栅(MLPG)。该系统通过计算机控制三维位移平台完成结构的制作,可编程实现光栅的自动化制作,并全程监控光栅的制作过程。与传统制造方法相比,基于双光子聚合的制造方法,在光纤表面使光刻胶周期性的发生双光子聚合完成MLPG的制作。因此在形成光栅时不依赖光纤基底的变化,该长周期光栅(LPG)结构形成于光纤外表面,适用于不同种类光纤上的LPG制备。在直径为6.9 μm的微纳光纤上制造了8个周期为95 μm的光栅块,在1331 nm波长处观察到了13.5 d
几年以前,国际商业机械公司的研究人员在碱金属蒸汽内压缩激光脉冲的工作过程中,发明了一种补偿光纤内短脉冲色散的技术。事实上,金属蒸汽引起的色散,其符号与玻璃产生的符号相反,波长最大时速度是最快,这与金属蒸汽内所产生的效应相反。该效应在金属蒸汽内如此显著,以致50厘米长的小盒子就能补偿由300米长的光纤所引起的色散。
期刊