论文部分内容阅读
氚提取系统是聚变堆液态锂铅回路中最重要的辅助系统之一,其主要功能是通过低压吹洗气载带法连续从液态锂铅鼓泡器中提取氚,必须实现高可靠性和安全性的自动控制。为此,初步设计聚变堆液态锂铅回路氚提取系统的软件,内容包括总体、界面、菜单、目录设计和主要变量设置。设计目标为软件模块和软件主要数据/数据文件间的流程,满足氚提取系统调试和连续运行要求,基本实现软件控制同位素分离装置多个加热器、冷却器、换热器、气动阀的开关和功率,测量实验界面中多个模拟信号的功能和特性。软件相关参数、模块、变量的模拟运行证实了设计方案的可行性。
The tritium extraction system is one of the most important auxiliary systems in the liquid lithium lead circuit of a fusion reactor. Its main function is to continuously extract tritium from a liquid lithium lead bubbler by a low pressure purge gas carrier tape method, which must achieve high reliability and safety Sexual automatic control. To this end, the preliminary design of fusion reactor liquid lithium tritium extraction loop system software, including the overall, interface, menu, directory design and setting of major variables. The target of the design is the flow between the software module and the main data / data file of the software to meet the requirements of commissioning and continuous operation of the tritium extraction system and basically realize the software control of the isotope separation device. Multiple heaters, coolers, heat exchangers, and pneumatic valve switches and Power, measure the function and characteristics of multiple analog signals in the experimental interface. Simulation of software-related parameters, modules and variables confirms the feasibility of the design.