论文部分内容阅读
2015年3月31日13时52分,国投新集能源股份有限公司刘庄煤矿(以下简称刘庄煤矿)发生一起机电事故,造成1人死亡,直接经济损失163.048万元。事故经过3月31日10时20分,副组长孙波带领屠仁勇、张涛、黄腾龙、李小盼检修主井上口提升装备及箕斗。13时30分,东台车检修工作结束后转换对西台车检修,检修人员发现西车东箕斗调绳油缸漏油较为严重,决定在三层检修平台更换漏油的截止阀。13时35分,李小盼配合孙波发信号联系提升机房将箕斗调整到要求位置,发送停车信号,然后同屠仁勇一同在一层检修平台清理环境,但检修
At 31:52 on March 31, 2015, an electromechanical incident occurred at Liuzhuang Coal Mine of SDIC Xinji Energy Co., Ltd. (hereinafter referred to as Liuzhuang Coal Mine), resulting in one death and a direct economic loss of RMB1,360,800. After the accident at 10:20 on March 31, deputy leader Sun Bo led Tu Renyong, Zhang Tao, Huang Tenglong, Li Xiaoping overhaul the main shaft to enhance the equipment and skip. 13:30, Dongtai overhaul after the end of the conversion of the West Taiwan car maintenance, maintenance personnel found that the West car Dongguo tune rope cylinder more serious oil leakage, decided to replace the three-tier inspection platform oil leakage valve. At 13:35, Li Xiaobing and Sun Bo sent a signal to contact the elevator room to adjust the skip position to the required position, sending a parking signal and then cleaning the environment together with Tu Renyong on a layer of overhaul platform. However, the overhaul