【摘 要】
：
The effects of homogenization treatment on microstructure, overburnt temperature and hot rolling plasticity of high strength 7B04 aluminium alloy were investiga
【机 构】
：
School of Materials Science and Engineering,Northeast Light Alloy Co. Ltd
论文部分内容阅读
The effects of homogenization treatment on microstructure, overburnt temperature and hot rolling plasticity of high strength 7B04 aluminium alloy were investigated. Under the condition of homogenization at 470 ℃, the starting melting temperature of the primary eutectics in ingot of non-equilibium solidified 7B04 alloy is 478 ℃. Using two-step homogenization processing at ultra-high temperature which comprises heating the ingots to 470 ℃ at 10 ℃/h and holding for 64 h, and then heating to 500 ℃ at 1 ℃/h and holding for 10 h, the ingots of 7B04 aluminium alloy could safely pass the sensitive overburnt zone between 480 ℃ and 495 ℃, and the ordinary burnt phenomena of the ingots between 480 ℃ and 495 ℃ does not occur because the excess low-melting point eutectic phases in the as-cast alloy dissolve into the matrix during the two-step homogenization processing. Consequently, the hot rolling plasticity of ingot of 7B04 aluminium alloy is greatly improved.
其他文献
This study describes a classification methodology based on support vector machines (SVMs),which offer superior classification perlormance for fault diagnosis in
A simple extension of cubic equations of state (EOS) to polymer systems has been proposed.The Soave-Redlich-Kwong (SRK) EOS was taken as a prototype to be used
地表水环境生态服务具有公共物品特性,消费者需求信息难以获得,影响资源的有效配置和环境公共政策的科学性.应用意愿价值评估法调查496户居民上海城市景观河流水质改善的支付
The structural, dielectric and piezoelectric properties of (1-x)(Bi1/2Na1/2) TiO3-xBaTiO3 ceramics were investigated for the compositional range, x=0.02, 0.04,
Oxide coatings on AM60B magnesium alloy were prepared using the microarc oxidation(MAO) technique in silicate-KOH electrolyte with addition of 0-6.0 g/L Na2WO4.
Using Geogrid-Reinforced Soil (GRS) we studied the working mechanism and design method of GRS at bridge approach with high backfill by field experiment. In a hi
By using the laser-monitoring technique,solid-liquid equilibrium data of glutaric acid in cyclohexanol,cyclohexanone,their five mixed solvents and acetic acid w
The 42.1 vol. pct TiC/AZ91D magnesium-matrix composites with interpenetrating networks were fabricated by in-situ reactive infiltration process. The compressive
P and RE complex modification of hypereutectic Al-Si alloys was conducted. The influences of P, RE content on the microstructure and mechanical properties of al
Heteropoly acid of Keggin structure phosphotungstic(HPW) and phosphomolybdic(HPMo) were chemically anchored to the modified SBA-15 channel. The materials were u