Solidification behaviour of Al-7% Si-Mg casting alloys

来源 :中国有色金属学会会刊(英文版) | 被引量 : 0次 | 上传用户:zlw12345678901188
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The effects of Mg content and cooling rate on the solidification behaviour of Al-7 % Si-Mg(mass fraction)casting alloys have been investigated using differential scanning calorimetry,differential thermal analysis and microscopy.The Mg contents were selected as respectively 0.00%,0.35% and 0.70% (mass fraction).DTA curves of Al-7%Si-0.55%Mg(mass fraction) alloy at various cooling rates were accomplished and the alloy melt was cast in different cooling rates.The results indicate that increasing Mg content can lower the liquidus and binary Al-Si eutectic transformation temperatures.Large Fe-rich π-phases (Al8 FeMg3 Si6) are found in the 0.70 % Mg alloys together with some small β-phases (Al5 FeSi);in contrast,only β-phases are observed in the 0.35 % Mg alloys.The test results of the Al-7%Si-0.55%Mg alloys identify that the liquidus and binary Al-Si eutectic transformation temperatures decrease,and the quantity of ternary Al-Si-Mg2 Si eutectic phase decreases as the cooling rate increases.
其他文献
Characteristic and dynamic viscosities of Hyaluronic acid ( HA ) derivative modified by polyethylene glycol (PEG) were tested with different reaction times (6 h
The black nickel formation process in leaching solution containing ammonia and chloride was investigated in terms of cyclic voltammetric and galvanostatic reduc
The effects of aging on mechanical properties,intergranular corrosion and exfoliation corrosion behaviors of a 2197 type A1-Li alloy were investigated,and the m
Rapidly solidified(RS)AZ31 magnesium alloy ribbons were made using melt spinning technique.The results show that its microhardness increases with the wheel spee
The influence of compression and decompression rates of carbon dioxide on the physiology of Absidi coerulea and Saccharomyces cerevisiae was investigated. Besid
To study hollow waveguides for CO2 laser transmission,a liquid-phase deposition technique is applied to form a silver film inside silica capillary based on the
Multi-objective robust state-feedback controller synthesis problems for linear discrete-time uncertain systems are addressed. Based on parameter-dependent Lyapu
The wettability and bonding in Ni/Ti(C, N) systems with multiple carbide additions were studied by sessile drop technique and vacuum brazing technique, respecti
The Levenberg-Marquardt method, the best algorithm to obtain the least-square solution of nonlinear equations, is applied to calculate the stable phase equilibr
The porous scaffold of the sol-gel derived bioactive glass (BG) in the system CaO-P2 O5- SiO2 was treated with the type I collagen solution. The pore walls of t