Superplasticity of Ti2448 Alloy with Nanostructured Grains

来源 :Journal of Materials Science & Technology | 被引量 : 0次 | 上传用户:snowpine15505
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Ti-24Nb-4Zr-8Sn, abbreviated as Ti2448 from its chemical composition in weight percent, is a multifunctional β type titanium alloy with body centered cubic (bcc) crystal structure, and its highly localized plastic deformation behavior contributes significantly to grain refinement during conventional cold processing. In the paper, the nanostructured (NS) alloy with grain size less than 50 nm produced by cold rolling has been used to investigate its superplastic deformation behavior by uniaxial tensile tests at initial strain rates of 1.5×10-2, 1.5×10-3 and 1.6×10-4 s-1 and temperatures of 600, 650 and 700℃. The results show that, in comparison with the coarse-grained alloy with size of 50 μm, the NS alloy has better superplasticity with elongation up to ~275% and ultimate strength of 50–100 MPa. Strain rate sensitivity (m) of the NS alloy is 0.21, 0.30 and 0.29 for 600, 650 and 700℃, respectively. These results demonstrate that grain refinement is a valid way to enhance the superplasticity of Ti2448 alloy. Ti-24Nb-4Zr-8Sn, abbreviated as Ti2448 from its chemical composition in weight percent, is a multifunctional β type titanium alloy with body centered cubic (bcc) crystal structure, and its highly localized plastic deformation behavior contribute significantly to grain refinement during conventional cold processing. In the paper, the nanostructured (NS) alloy with grain size less than 50 nm produced by cold rolling has been used to investigate its superplastic deformation behavior by uniaxial tensile tests at initial strain rates of 1.5 × 10-2, 1.5 × 10-3 and 1.6 × 10 -4 s -1 and temperatures of 600, 650 and 700 ° C. The results show that, in comparison with the coarse-grained alloy with size of 50 μm, the NS alloy has better superplasticity with elongation up These results demonstrate that grain refinement is a valid way to ~ 275% and ultimate strength of 50-100 MPa. respectively. Strain rate sensitivity (m) of the NS alloy is 0.21, 0.30 and 0.29 for 600, 650 and 700 ° C, respectively. enhance the superplasticity of Ti2448 alloy.
其他文献
在高中体育教学中,培养和激发学生对耐久跑的兴趣,对提高耐久跑的教学质量有不可忽视的作用。因此,如何利用有效的教学方法改变传统的教学模式值得探讨。 In high school ph
期刊