CuO-CeO2/Al2O3/FeCrAl monolithic catalysts prepared by in situ combustion synthesis method for prefe

来源 :稀土学报(英文版) | 被引量 : 0次 | 上传用户:dsfddsffd
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
This work described in situ combustion synthesis method for depositing CuO-Ceo2 on the FeCrAl honeycomb supports. The influence of the solution concentration and the role of the additve were studied and analyzed by scanning electron microscopy (SEM), X-ray diffractometer (XRD), and temperature programmed reduction (TPR) techniques. The results showed that 200 g/L of the active solution was the most appropriate concentration for preparing the monolithic catalysts, and the additives of praseodymium and lanthanum improved the adhesion stability of the monolithic catalysts. The addition of Pr did not greatly affect the catalytic performance, but CO could not be totally converted into CO2 after the addition of La into the CuO-CeO2/Al2O3/FeCrAl catalysts.
其他文献
对T2紫铜薄板进行电磁微胀形有模成形实验,研究不同电压及不同凹模深度对材料成形性能的影响.采用激光共聚焦显微镜及轮廓仪研究不同充电电压和不同凹模深度下的制件截面轮廓
导致干旱出现的因素有很多,也就使得对干旱进行监测的方法有很多,对干旱进行描述时,主要采用指标这一概念进行,即对干旱进行评价时,采用气象干旱指标、农业干旱指标、水文干旱指标
采用Nd-YAG激光对AZ31 HP镁合金进行激光自熔焊接.显微组织分析表明,使用或不使用填料(焊料)AZ61镁合金得到的激光焊接接头的平均晶粒尺寸大约为12 μm,显微硬度和拉伸强度与
针对分散污水处理难的问题,本文研究了复合生态滤池工艺处理分散生活污水的性能特性,即考察了复合生态滤池工艺处理分散生活污水中有机物、NH4+-N及TP的处理效果。试验结果表明
研究一种镁基Mg-10Ni-2Mm(摩尔分数,%)储氢合金在不同凝固速率下的组织演化.结果表明:增加凝固速率可以大幅度细化合金条带的晶粒;采用的石墨冷却轮表面速度为3.1, 10.5和20.
Carbon-supported platinum catalysts were prepared by NaBH4 reduction of metal precursors and the CeO2 nanoparticles were prepared by citric acid sol-gel method.
随着我国经济的不断发展,城市化进程的不断加快,城市变化可谓是日新月异,一座座高楼大厦也拔地而起,人们享受着城市文明带来的方便和快捷,但与此同时,我们应当看到,在建设城市过程中
餐厨垃圾是城市生活垃圾中一项主要内容,由于来源广、产量多、易变质、蛋白质含量丰富,具有危害性和资源性双重特点。由于厨余垃圾是一种可再生资源,如何实现对其资源化处理后循
将工业纯铝暴露在一定浓度的泥浆中,样品以不同的角度固定,并在不同速度下旋转,通过质量损失来测量样品的磨损率.结果表明,当冲击角度小于90°时,样品的磨损率随冲击角度的增
Al2O3/5%SiC nanocomposites were fabricated by pressureless sintering using MgO as a sintering aid and then post hot-isostatic pressed (HIP). which can subsequen