【摘 要】
：
The surface oxidation films on H13 steel samples, obtained by different oxidation processes were observed by optical microscope. It is shown that the oxidation
【机 构】
：
School of Materials Science and Engineering
论文部分内容阅读
The surface oxidation films on H13 steel samples, obtained by different oxidation processes were observed by optical microscope. It is shown that the oxidation speed of H13 steel is increased remarkably due to the surface modification of plasma peening. Further researches were made by XRD, SEM and EDS. The activation of H13 surface caused by plasma peening and the subsequent higher oxygen diffusion rate into the steel seem to be the main reasons of higher oxidation speed. The nitride layer, generally formed on the steel surface under plasma nitriding process, can be substituted by oxide in subsequent oxidation process, which can reduce the risk of heat cracking in some hot work applications. Therefore, the plasma nitriding plus oxidation process is a proper choice for some hot work dies, which demands high hardness to avoid indentation as well as high toughness to avoid cracks.
其他文献
The study of recent years found that big bulk amorphous alloys were formed for some multi-element compositions at rapid cooling speed such as Zr-, La-, Fe-, Mg-
The forming-regions and properties were studied on phosphate system glasses Sm2O3 doped by two step melting method. It shows that with the increasing of rare ea
Phosphors with ( Ce0. 67 -xGdxTb0. 33 ) MgAl11 O19 (0 ≤ x ≤0.37 ) composition were prepared by sol-gel processing. The preparation process, crystal structure
Anodic dissolution behaviour of Ni in mono-, di- and trichloroacetic acids has been investigated by measuring current densities of Ni electrode (versus SCE) at
In this paper, undoped LaCl3 crystal growth was reported by modified Bridgman method.The starting materials used as charge for crystal growth was found to conta
The species and their formation constants in the ternary systems were obtained by the Scogs2 software from potentiometric titration data. The Comics software wa
The flow maldistribution and the effect of different inlet configuration on the flow distribution in platefin heat exchangers were studied experimentally. It is
The improvement of machining behavior of prehardened-mould steel for plastic is realized by using computer-aided composition design in this work. The results sh
The kinetics of bulk polymerization of octamethylcyclotetrasiloxane under acid circumstance is studied.A kinetic model is put forward and kinetic parameters are
A new nanometer-scale ferrite thin film with excellent high-frequency characteristics has been developed by the spray-spin-heating-coating method. The effects o