带钢粗轧机轧制过程中,如果上下工作辊的线速度不匹配,就会在工作辊与带钢表面之间产生相对滑动,情况严重时还会引起机械振动和电动机过热。因此,需要依靠在电动机控制系统中调节电动机的转速来保持同步。实际轧制过程中发现,由于很多外界因素的影响常出现上下工作辊线速度不一致的现象。通过检测上下工作辊电动机实际电流,计算电流差值,在电动机传动装置中进行负荷平衡调节,附加到最终的给定上,以调节电动机实际的输出转矩,使该问题得到了很好的解决。 In the strip roughing rolling process, if the line speeds of the upper and lower work rolls do not match, a relative slip between the work roll and the strip surface occurs and in severe cases, mechanical vibrations and overheating of the motor can occur. Therefore, the need to rely on the motor control system to adjust the motor speed to maintain synchronization. The actual rolling process found that due to the influence of many external factors often appear inconsistent with the upper and lower work roll line speed phenomenon. The problem is solved by detecting the actual current of the upper and lower work roll motors, calculating the current difference, adjusting the load balance in the motor drive, and adding it to the final set to adjust the actual output torque of the motor .