【摘 要】
：
A laboratory-scale intermediate-temperature H2S fuel cell with a configuration of H2S, (metal sulfide-based composite anode)/Li2SO4+Al2O3/(NiO-based composite c
【机 构】
：
College of Chemical Engineering,Department of Chemical and Materials Engineering
论文部分内容阅读
A laboratory-scale intermediate-temperature H2S fuel cell with a configuration of H2S, (metal sulfide-based composite anode)/Li2SO4+Al2O3/(NiO-based composite cathode), air was developed and studied for production of power and for desulfurization of a fuel gas process stream. The cell was run at typical temperature (600-650℃) and ambient pressure, but its electrochemical performance may be limited by electrolyte membrane thickness. The membrane and its performance in cell have been characterized using scanning electron microscope (SEM) and electrochemical impedance spectrum (EIS) techniques. Composite anodes based on metal sulfides, Ag powder and electrolyte behaved well and stably in H2S stream, and composite cathodes based mainly on nickel oxide, Ag powder and electrolyte had superior performance to Pt catalyst. The maximum power density of up to 70mW·cm-2 and current density of as high as 250mA·cm-2 were obtained at 650℃. However, the long-term cell stability remains to be investigated.
其他文献
Free-standing diamond films were prepared by hot filament chemical vapor deposition (HFCVD) method under different conditions. Inter-digital transducers (IDTs)
A new kind of amorphous active brazing alloy foil with the composition of Ti40Zr25Ni15Cu20 was successfully synthesized using melt spinning in roll forging mach
The bentonite was modified using Ca-bentonite as a matrix and octadecyl/ hexadecyl ammoniumsized by dispersing it into the dimethyl benzene-methyl alcohol syste
The rare earth manganite BaLn2Mn2O7 (Ln=rare earth element) has a Sr3Ti2O7-type layered perovskite structure with double-block oxygen octahedra belonging to the
The solution algorithm (SOLA) method was used to solve the velocity and pressure field of the thermal flow filling process, and the volume of fluid (VOF) method
A quasi 0-dB coupler composed of a composite right-/left-handed transmission line (CRLH TL) and a conventional right-handed transmission line (RH TL) is present
The titanium barium glass microspheres doped with Er2O3 were designed and prepared. The components of the glass sample were 25TiO2-27BaCO3-8Ba(NO3)2-5ZnO2-10CaC
Nanoparticles of red long afterglow phosphor Sr3Al2O6: Eu2+ were prepared by microwave irradiation method at a power of 680 W and a processing time of 15 min. T
The thermal stability of Al3(Sc,Zr) precipitates in the cold worked Al-Mg-Sc-Zr alloy after elevated temperature exposure was investigated. The evaluation was c
In this paper, several widely applied fracture criteria were first numerically examined and the crack-tip-region Jintegral criterion was confirmed to be more ap