【摘 要】
：
Electronic speckle pattern interferometry (ESPI) is a nondestructive, whole-field optical measurement technique. The removal of speckle noise is fundamental to extract measurement information accurately. In this letter, two filtering methods based on the
【出 处】
：
ChineseOpticsLetters
论文部分内容阅读
Electronic speckle pattern interferometry (ESPI) is a nondestructive, whole-field optical measurement technique. The removal of speckle noise is fundamental to extract measurement information accurately. In this letter, two filtering methods based on the oriented feature of ESPI fringes, i.e., the second-order oriented partial differential equation (SOOPDE) and oriented, regularized quadratic-cost function filtering methods, are first proven to be consistent. An important question in solving partial differential equation, i.e., how to select suitable parameters in an adaptive manner, is then discussed. The computer-simulated and experimentally obtained ESPI fringe patterns and phase map are processed by the SOOPDE filtering model with adaptive selective parameters. The qualitative and quantitative analyses demonstrate that the parameters selected by the adaptive method are effective and suitable for the SOOPDE filtering model.
其他文献
为了满足激光推进、光电对抗等应用领域的需要,研制了一台高单脉冲能量高重复频率新型TEA CO2激光器。采用紫外(UV)预电离双路Ernst石墨电极串并联放电结构、超薄水冷不变形镜折叠腔、双回路直冷式封闭循环流动系统和高压大电流快脉冲开关电源等技术,解决了高功率高压电容充电、高气压大体积均匀辉光放电、高气压高速均匀流场、激光谐振腔和高脉冲能量、高重复频率脉冲激光输出等技术难题。成功研制了一台最大脉冲激光能量92 J,重复频率35 Hz,激光输出发散角1.4 mrad,脉冲能量稳定性0.8％,平均功率大于30
A split gate MOSFET (SG-MOSFET) is widely known for reducing the reverse transfer capacitance (CRSS). In a 3.3 kV class, the SG-MOSFET does not provide reliable operation due to the high gate oxide electric field. In addition to the poor
Considering an optical bistable system with cross-correlated additive white noise and multiplicative colored noise, we study the effects of correlation between the noises on the correlation function C(s) using the unified colored noise approximation and t
在室外光照条件变化下进行有效的障碍物识别是高压输电线路巡检机器人所面临的技术难点之一。针对弱光条件下障碍物识别的稳健性问题,提出了一种基于机器人视觉的障碍物识别智能方法,以使巡检机器人适应各种不同程度的弱光变化。通过对采集的障碍物图像进行自适应同态滤波处理,以减少部分光照的影响;将障碍物图像分成均匀大小的子区域,运用改进的局部方向模式提取各个子区域图像的特征直方图向量,并把子块特征直方图逐个串联为总的直方图;再选用卡方距离法进行统计识别。实验结果表明:该方法使巡检机器人对输电线上的防震锤、悬垂线夹和绝缘子
FM-to-AM modulation is an important effect in the front end of high-power lasers that influences the temporal profile. Various methods have been implemented in standard-fiber and polarization-maintaining (PM)-fiber front ends to suppress the FM-to-AM modu
以Ti(SO4)2水溶液为原料, 在水热条件下直接水解合成了锐钛型纳米TiO2颗粒。利用透射电镜(TEM)、 X射线衍射(XRD)、 BET低温吸附和紫外-可见光谱(UV-Vis)等方法对产物进行了表征, 并研究了样品光催化降解甲基橙(MO)的性能。 结果表明所制得纳米TiO2颗粒为锐钛矿型, 晶型良好, 平均粒径为24 nm, BET比表面积约为56.20 m2?g-1。 光催化活性与商品纳米TiO2(P25)相近, 具有良好的工业应用前景。(SO4)2 So
1980年11月我应日本学术振兴会邀请，访问了日本几个激光研究室并进行了短期工作。为了促进学术交流，现做简单介绍。
对受激布里渊散射(SBS)信号产生的过程及原理进行了分析,提出了一种利用环腔多次放大产生多级布里渊散射信号的方法,并通过实验产生了较为稳定的1-6阶散射信号。在此基础上,提出了一种利用环腔所产生的四阶布里渊散射信号对经马赫曾德尔调制器 (MZM)调制产生的四阶边带信号进行选择放大,而后将被放大了的高阶边带信号与载波信号进行拍频,从而获得高频微波信号的简单方法。该方法仅需要一个掺铒光纤放大器(EDFA)就可以产生高达n(1≤n≤6)倍于11 GHz的微波信号,具有器件成本低、倍频效率高的优点。仿真和实验结果
提出了每个超晶胞由8个不同V-形天线组成的双周期超晶胞错位超表面结构,并从理论和实验上研究了其特性。计算表明,当横电光垂直入射时,会得到共偏振透射和交叉偏振异常折射。通过调节两个超晶胞周期单元的横向错开距离,可改变异常折射的相位差,调控其振幅。实验结果表明,当4.3 THz的光垂直入射到两个超晶胞周期单元横向错开距离为0,2,4,6个V-形单元的样品上时,异常折射光强分别为入射光强的3.6%,1.7%,0.7%,1.9%,与计算结果一致。
We investigate the temperature dependence of radiation-induced attenuation (RIA) at 1 310 nm for a Ge/P co-doped fiber after a steady-state \gamma -ray irradiation. A irradiation facility 60Co source is used to irradiate the fiber at a dose rate of 0.5