【摘 要】
：
Noise-like pulses having a pedestal of 690 fs and a spike of 59.6 fs were generated in a nonlinear Yb-doped fiber amplification system. The seed source is a mode-locked Yb-doped fiber laser by nonlinear polarization rotation, and dissipative soliton pulse
【机 构】
：
CollegeofPhysicsandOptoelectronics,FacultyofScience,BeijingUniversityofTechnology,Beijing100124,Chin
【出 处】
：
ChineseOpticsLetters
论文部分内容阅读
Noise-like pulses having a pedestal of 690 fs and a spike of 59.6 fs were generated in a nonlinear Yb-doped fiber amplification system. The seed source is a mode-locked Yb-doped fiber laser by nonlinear polarization rotation, and dissipative soliton pulses were obtained in it. Then, the dissipative soliton pulses passed through a 7.6 m dispersive fiber to enhance the dispersion and nonlinearity. Further on, the dissipative soliton pulses were launched into a Yb-doped fiber nonlinear amplifier, and stable noise-like pulses with a pedestal of 6.26 ps and a spike of 227 fs were achieved. Finally, by a grating pair, the pedestal and spike of the noise-like pulses were effectively compressed to 690 fs and 59.6 fs, respectively. To the best of our knowledge, this is the shortest pedestal demonstrated in noise-like pulses operating at 1 μm.
其他文献
Lead halide perovskites have drawn extensive attention over recent decades owing to their outstanding photoelectric performances. However, their toxicity and instability are big issues that need to be solved for further commercialization. Herein, we adopt
New or optimized-mixed evaporation materials of PIZOLIN, ALVIRIT, ROMA, and TiO53[1] on the basis of high-index pure substances of TiO2, Nb2O5, CeO2, ZrO2, and Ta2O5 are developed with the aim of identifying dielectric materials with specific refractive i
Metasurfaces have demonstrated unprecedented capabilities in manipulating light with ultrathin and flat architectures. Although great progress has been made in the metasurface designs and function dem
成像速度和质量是衡量太赫兹(THz)成像系统的关键因素。采用连续功率约10 mW的CO2激光抽运2.24 THz激光作为成像光源，利用像元数为124×124的热像仪作为面阵探测器，进行了隐藏物探测成像实验。实验中分别采用纸和聚乙烯信封作为遮挡物，获得了原始数据，并在此基础上运用一些图像预处理方法，以提高图像质量。实时成像结果显示，利用2.24 THz激光实时成像系统，可以对穿过纸和信封后的物体进行成像，物体轮廓基本可见。由于激光功率较低，图像质量不好，但经过后续的图像预处理，使得图像中物体轮廓较清晰。因此
A double-zone aspheric diffractive intraocular lens (IOL) was designed and manufactured aiming to regain a continuous range of clear vision for pseudophakic presbyopia. After obtaining the IOL structure parameters through optimization based on an aphakic
一种新型的半导体激光元件几乎具有纤维光通信系统所要求的理想特性。这种长度介于10至100微米之间的钕硼酸铝晶体激光器能发射一种难得的高纯度单一光谱线，波长为1.06微米。
用连续Ti宝石激光器作为激发源,详细地研究了氟锆酸盐玻璃中Pr3 和Yb3 的吸收光谱、能级结构和Yb3 敏化Pr3 的上转换发光。研究结果表明Yb3 与Pr3 之间的能量传递是通过离子之间的能量共振转移来进行的;在880nm的激发光作用下,玻璃的上转换荧光强度最高;当玻璃中含有低浓度的Yb3 、较高浓度的Pr3 和含有较高浓度的Yb3 、低浓度的Pr3 时上转换荧光的强度都较高。
Three-dimensional(3D)artificial compound eyes(ACEs)are helpful for wide field-o-fview imaging and sensing system applications.However,existing batch preparation methods are technically challenging.A b